Four Tips for Solving Shower Cleaning Methods
- Date：2024-04-12
- Read：537
Due to long-term use, showerheads can accumulate dirt and block the shower holes, resulting in a decrease in water flow. So, some people may use strong acid for cleaning when increasing cleaning efforts. However, this approach not only corrodes the showerhead, but also causes secondary damage. Therefore, to avoid damage to the showerhead, you must learn these cleaning methods!
Soak with vinegar: Prepare some white vinegar first, then pour the vinegar into a basin and immerse the showerhead in the vinegar. After 10 minutes, the dirt in the showerhead water can be removed.
Using lubricants: If the metal of the showerhead rusts and causes severe blockage, rust removal and anti rust lubricants can be used to separate the rusted layer from the metal layer and generate a protective film. If your showerhead is made of stainless steel material, it would be very suitable.
Acupuncture: When cleaning, insert the needle into the outlet hole one by one, causing the scale to fall off. Then, pour water into the nozzle from the inlet, shake and clean, and pour out the water. This way, the scale can be thoroughly cleaned.
Rubbing the spout: Nowadays, many showerheads choose soft thermoplastic elastomers as their spouts. For such showerheads, simply gently rub the spout to crush impurities, repeat 2-3 times, and rinse with water.
But when cleaning, attention should be paid to:
1. When using a showerhead, attention should be paid not to apply too much force, and the hose connected to the showerhead should not be bent or even damaged.
When cleaning a showerhead, if you encounter stains that are difficult to remove, you can cut a fresh lemon slice to wipe off the stains. Do not use strong acidic liquids for soaking and cleaning to prevent corrosion of the showerhead.
If your showerhead is used for a long time, dirt will accumulate inside, and harmful bacteria and impurities will accumulate. It is recommended to replace it to avoid affecting your physical health.
Soak with vinegar: Prepare some white vinegar first, then pour the vinegar into a basin and immerse the showerhead in the vinegar. After 10 minutes, the dirt in the showerhead water can be removed.
Using lubricants: If the metal of the showerhead rusts and causes severe blockage, rust removal and anti rust lubricants can be used to separate the rusted layer from the metal layer and generate a protective film. If your showerhead is made of stainless steel material, it would be very suitable.
Acupuncture: When cleaning, insert the needle into the outlet hole one by one, causing the scale to fall off. Then, pour water into the nozzle from the inlet, shake and clean, and pour out the water. This way, the scale can be thoroughly cleaned.
Rubbing the spout: Nowadays, many showerheads choose soft thermoplastic elastomers as their spouts. For such showerheads, simply gently rub the spout to crush impurities, repeat 2-3 times, and rinse with water.
But when cleaning, attention should be paid to:
1. When using a showerhead, attention should be paid not to apply too much force, and the hose connected to the showerhead should not be bent or even damaged.
When cleaning a showerhead, if you encounter stains that are difficult to remove, you can cut a fresh lemon slice to wipe off the stains. Do not use strong acidic liquids for soaking and cleaning to prevent corrosion of the showerhead.
If your showerhead is used for a long time, dirt will accumulate inside, and harmful bacteria and impurities will accumulate. It is recommended to replace it to avoid affecting your physical health.
NEXT
Bathroom design style presents a global trend